Custom Water Shut off Brass Motorized Control Valve with Electric Actuator Ball Valve

• Media: Water
• Material: Brass
• Connection Form: Thread
• Driving Mode: Electric
• Nominal Pressure: PN1.0-32.0MPa
• Channel: Tee Type
• Model NO.: JX-0329
• Structure: Cartridge
• Type: Cartridge
• Function: Relief Valve
• Temperature: Normal Temperature
• Standard: En331
• Application: Household Usage
• Transport Package: Carton with Pallet
• Specification: 1/2-1"
• Trademark: Plumberstar
• Origin: Taizhou
• HS Code: 8481804090
• Production Capacity: 5000000/Year

Product Description

JX-0329
Technical Parameters:

• Valve size: DN15, DN20, DN25
• Connection: threaded connection
• Valve structure: two-way, three-way
• Media: hot/cold water
• Pressure: PN20
• Close differential pressure: 0.18 ~ 0.22Mpa
• Power supply voltage: AC220V ± 10%, 50 / 60HZ
• Consumable power: <6.5W
• Run mode: On or Off

• About this item

• High Quality: The motorized ball valve is made of high quality brass, the ball valve is durable and reliable, the valve rod is 304 stainless steel material. Low noise, running noise less than 40dB
• Ensure Safety: Built-in actuator de-energize the valve when it is closed, safe and energy-saving.Accurate structure, tight close, no leakage.
• Easy to Use: Ball valve and actuator for nut connection Installation, quick disassembly. The Motorized Ball Valve occupies little external space and can be installed on the wall.
• Widely Applicable: Mainly used for the fan coil and water control system of air conditioner. 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control; No energy expended once in position
• 100% GuaranteeHigh quality product. However, if you are not 100% satisfied with our service or our products, simply contact us. We are always at the side of our customers to support and continuously seek new ways to improve

• SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable; The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last
• BSP&NPT THREADING-½" quality brass thread, manufactured and measured according to National Pipe Thread standards; This electrical ball valve is a full port, meaning the bore in the ball is a full1/2"; This minimizes pressure loss through the valve; Perfect for home automation projects
• - Note: blue and brown wire cannot be connected to 230v and 24v with 2 options L at the same time. or the valve will be damaged
• The maximum pressure is 1.0Mpa. The nominal pressure is 1.6Mpa.
• Interface: DN15 = 1/2 inch; DN20 = 3/4 inch; DN25 = 1 inch; DN32 = 1-1 / 4 inch
• Flow: DN15 (1/2 inch): 11m3 / h; DN20 (3/4 inch): 20m3 / h; DN25 (1 inch): 60m3 / h; DN32 (1-1 / 4 inch): 80m3 / h;
• ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed; making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time
• 

•